| 전자부품 데이터시트 검색엔진 |
|
MCP1415RT 데이터시트(PDF) 1 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP1415RT 데이터시트(HTML) 1 Page - Microchip Technology |
|
1 / 20 page ![]() © 2008 Microchip Technology Inc. DS22092C-page 1 MCP1415/16 Features • High Peak Output Current: 1.5A (typical) • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • Low Shoot-Through/Cross-Conduction Current in Output Stage • High Capacitive Load Drive Capability: - 470 pF in 13 ns (typical) - 1000 pF in 20 ns (typical) • Short Delay Times: 41 ns (tD1), 48 ns (tD2) (typical) • Low Supply Current: - With Logic ‘1’ Input - 0.65 mA (typical) - With Logic ‘0’ Input - 0.1 mA (typical) • Latch-Up Protected: Will Withstand 500 mA Reverse Current • Logic Input Will Withstand Negative Swing Up To 5V • Space-saving 5L SOT-23 Package Applications • Switch Mode Power Supplies • Pulse Transformer Drive • Line Drivers • Level Translator • Motor and Solenoid Drive General Description The MCP1415/16 are high speed MOSFET drivers capable of providing 1.5A of peak current. The inverting or non-inverting single channel output is directly controlled from either TTL or CMOS (3V to 18V) logic. These devices also feature low shoot-through current, matched rise and fall time, and short propagation delays which make them ideal for high switching frequency applications. The MCP1415/16 devices operate from a single 4.5V to 18V power supply and can easily charge and discharge 1000 pF gate capacitance in under 20 ns (typical). They provide low enough impedances in both the on and off states to ensure the intended state of the MOSFET will not be affected, even by large transients. These devices are highly latch-up resistant under any condition within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking (of either polarity) occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of reverse current being forced back into their outputs. All terminals are fully protected against Electrostatic Discharge (ESD) up to 2.0 kV (HBM) and 400V (MM). Package Types: 4 1 2 3 5 VDD NC IN OUT GND OUT GND MCP1415 MCP1416 SOT-23-5 4 1 2 3 5 VDD NC IN OUT MCP1415R MCP1416R OUT GND VDD Tiny 1.5A, High-Speed Power MOSFET Driver |
유사한 부품 번호 - MCP1415RT |
|
유사한 설명 - MCP1415RT |
|
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |