56F8366 datasheet(42/182 Pages) FREESCALE

42 / 182 page

56F8366 Technical Data, Rev. 7

Freescale Semiconductor

Preliminary

The device’s external memory interface (EMI) can operate much like the 56F80x family’s EMI, or it can

be operated in a mode similar to that used on other products in the 56800E family. Initially, CS0 and CS1

are configured as PS and DS, in a mode compatible with earlier 56800 devices.

Eighteen address lines are required to shadow the first 192K of internal program space when booting

externally for development purposes. Therefore, the entire complement of on-chip memory cannot be

accessed using a 16-bit 56800-compatible address bus. To address this situation, the EMI_MODE pin can

be used to configure four GPIO pins as Address[19:16] upon reset (only one of these pins [A16] is usable

in the 56F8366/56F8166).

The EMI_MODE pin also affects the reset vector address, as provided in Table 4-4. Additional pins must

be configured as address or chip select signals to access addresses at P:$10 and above.

Table 4-3 Changing OMR MA Value During Normal Operation

OMR MA

Chip Operating Mode

Use internal P-space memory map configuration

Use external P-space memory map configuration – If MB = 0 at reset, changing this bit has no

effect.

56F8366 데이터시트(PDF) 42 Page - Freescale Semiconductor, Inc