Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications

and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of

Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,

fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental

damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.

DS-CPC1788-R02

©Copyright 2008, Clare, Inc.

ISOPLUS™ is a trademark of IXYS Corporation

All rights reserved. Printed in USA.

7/18/08

For additional information please visit our website at: www.clare.com

6

CPC1788

MECHANICAL DIMENSIONS:

RoHS

2002/95/EC

1

23

4

NOTE: Bottom heat sink meets 2500V

DIMENSIONS

MIN - MAX mm

(MIN - MAX inches)

ISOPLUS-264 Package

25.91 - 26.42

(1.020-1.040)

19.56 - 20.29

(0.770 - 0.799)

19.81 - 20.83

(0.780 - 0.820)

7.62 BSC

(0.300 BSC)

3.81 BSC

(0.150 BSC)

2.03 - 2.59

(0.080 - 0.102)

2.54 - 3.03

(0.100 - 0.130)

12.54 - 13.03

(0.490 - 0.513)

2.54 - 4.57

(0.100 - 0.180)

5.33 - 5.97

(0.210 - 0.235)

4.83 - 5.21

(0.190 - 0.205)

1.17 - 1.40

(0.046 - 0.055)

1.65 - 2.03

(0.065 - 0.080)

16.97 - 17.53

(0.668 - 0.690)

20.34 - 20.85

(0.801 - 0.821)

2.59 - 3.00

(0.102 - 0.118)

1.47 - 1.73

(0.058 - 0.068)

1.14 - 1.40

(0.045 - 0.055)

0.51 - 0.74

(0.020 - 0.029)

MANUFACTURING INFORMATION

Soldering

For proper assembly, the component must be

processed in accordance with the current revision

of IPC/JEDEC standard J-STD-020. Failure to

follow the recommended guidelines may cause

permanent damage to the device resulting in impaired

performance and/or a reduced lifetime expectancy.

Washing

Clare does not recommend ultrasonic cleaning or the

use of chlorinated solvents.