ATmega16 datasheet(27/357 Pages) ATMEL

27 / 357 page

2466S–AVR–05/09

ATmega16(L)

The CKSEL0 Fuse together with the SUT1..0 Fuses select the start-up times as shown in Table

Notes:

1. These options should only be used when not operating close to the maximum frequency of the

device, and only if frequency stability at start-up is not important for the application. These

options are not suitable for crystals.

2. These options are intended for use with ceramic resonators and will ensure frequency stability

at start-up. They can also be used with crystals when not operating close to the maximum fre-

quency of the device, and if frequency stability at start-up is not important for the application.

Table 5. Start-up Times for the Crystal Oscillator Clock Selection

CKSEL0

SUT1..0

Start-up Time from

Power-down and

Power-save

Additional Delay

from Reset

CC = 5.0V)

Recommended Usage

258 CK(1)

4.1 ms

Ceramic resonator, fast

rising power

258 CK(1)

65 ms

Ceramic resonator, slowly

rising power

010

1K CK(2)

–

Ceramic resonator, BOD

enabled

011

1K CK(2)

4.1 ms

Ceramic resonator, fast

rising power

100

1K CK(2)

65 ms

Ceramic resonator, slowly

rising power

101

16K CK

–

Crystal Oscillator, BOD

enabled

16K CK

4.1 ms

Crystal Oscillator, fast

rising power

16K CK

65 ms

Crystal Oscillator, slowly

rising power

ATmega16 데이터시트(PDF) 27 Page - ATMEL Corporation

ATmega16 데이터시트(HTML) 27 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL