R32C152 datasheet(17/133 Pages) RENESAS

17 / 133 page

REJ03B0231-0102 Rev.1.02 Nov 30, 2009

Page 17 of 130

R32C/152 Group

2. Central Processing Unit (CPU)

2.1.8.5

This flag selects a register bank. It indicates 0 when the register bank 0 is selected, and 1 when the

2.1.8.6

Overflow Flag (O flag)

This flag becomes 1 if an overflow occurs in an operation; otherwise it is 0.

2.1.8.7

Interrupt Enable Flag (I flag)

This flag enables maskable interrupts. To disable maskable interrupts, set this flag to 0. To enable

them, set this flag to 1. When an interrupt is accepted, the flag becomes 0.

2.1.8.8

Stack Pointer Select Flag (U flag)

To select the interrupt stack pointer (ISP), set this flag to 0. To select the user stack pointer (USP), set

this flag to 1.

It becomes 0 when a hardware interrupts is accepted or when an INT instruction designated by a

software interrupt number from 0 to 127 is executed.

2.1.8.9

Floating-point Underflow Flag (FU flag)

This flag becomes 1 when an underflow occurs in a floating-point operation; otherwise it is 0. It also

becomes 1 when the operand has invalid numbers (subnormal numbers).

2.1.8.10

Floating-point Overflow Flag (FO flag)

This flag becomes 1 when an overflow occurs in a floating-point operation; otherwise it is 0. It also

becomes 1 when the operand has invalid numbers (subnormal numbers).

2.1.8.11

Processor Interrupt Priority Level (IPL)

The processor interrupt priority level (IPL), consisting of three bits, selects a processor interrupt priority

level from level 0 to 7. An interrupt is acceptable when the interrupt request level is higher than the

selected IPL.

When the processor interrupt priority level (IPL) is set to 111b (level 7), all interrupts are disabled.

2.1.8.12

Fixed-point Radix Point Designation Bit (DP bit)

This bit designates the radix point. It also specifies which portion of the fixed-point multiplication result

to take. It is used in the MULX instruction.

2.1.8.13

Floating-point Rounding Mode (RND)

The 2-bit floating-point rounding mode selects a rounding mode for floating-point calculation results.

2.1.8.14

Reserved

Only set this bit to 0. The read value is undefined.

R32C152 데이터시트(PDF) 17 Page - Renesas Technology Corp

R32C152 데이터시트(HTML) 17 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL