ATmega169P datasheet(193/393 Pages) ATMEL

193 / 393 page

193

8018N–AVR–08/09

ATmega169P

Receiver will generate a parity value for the incoming data and compare it to the UPM0n setting.

If a mismatch is detected, the UPEn Flag in UCSRnA will be set.

• Bit 3 – USBSn: Stop Bit Select

This bit selects the number of stop bits to be inserted by the Transmitter. The Receiver ignores

this setting.

• Bit 2:1 – UCSZn[1:0]: Character Size

The UCSZn[1:0] bits combined with the UCSZn2 bit in UCSRnB sets the number of data bits

(Character SiZe) in a frame the Receiver and Transmitter use.

• Bit 0 – UCPOLn: Clock Polarity

This bit is used for synchronous mode only. Write this bit to zero when asynchronous mode is

used. The UCPOLn bit sets the relationship between data output change and data input sample,

and the synchronous clock (XCK).

Table 19-5.

UPM Bits Settings

UPMn1

UPMn0

Parity Mode

Disabled

Reserved

Enabled, Even Parity

Enabled, Odd Parity

Table 19-6.

USBSn Bit Settings

USBSn

Stop Bit(s)

01-bit

12-bit

Table 19-7.

UCSZ Bits Settings

UCSZn2

UCSZn1

UCSZn0

Character Size

5-bit

6-bit

7-bit

8-bit

100

Reserved

101

Reserved

110

Reserved

9-bit

Table 19-8.

UCPOLn Bit Settings

UCPOLn

Transmitted Data Changed

(Output of TxD Pin)

Received Data Sampled (Input on RxD

Pin)

Rising XCK Edge

Falling XCK Edge

Rising XCK Edge

ATmega169P 데이터시트(PDF) 193 Page - ATMEL Corporation

ATmega169P 데이터시트(HTML) 193 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL