ATtiny10 datasheet(8/168 Pages) ATMEL

8 / 168 page

8127C–AVR–10/09

ATtiny4/5/9/10

4.4

General Purpose Register File

The Register File is optimized for the AVR Enhanced RISC instruction set. In order to achieve

the required performance and flexibility, the following input/output schemes are supported by the

• One 8-bit output operand and one 8-bit result input

• Two 8-bit output operands and one 8-bit result input

• One 16-bit output operand and one 16-bit result input

Figure 4-2 below shows the structure of the 16 general purpose working registers in the CPU.

Figure 4-2.

AVR CPU General Purpose Working Registers

Note:

A typical implementation of the AVR register file includes 32 general prupose registers but

ATtiny4/5/9/10 implement only 16 registers. For reasons of compatibility the registers are num-

bered R16...R31, not R0...R15.

Most of the instructions operating on the Register File have direct access to all registers, and

most of them are single cycle instructions.

4.4.1

The X-register, Y-register, and Z-register

Registers R26..R31 have some added functions to their general purpose usage. These registers

are 16-bit address pointers for indirect addressing of the data space. The three indirect address

registers X, Y, and Z are defined as described in Figure 4-3.

R16

R17

General

R18

Purpose

…

Working

R26

X-register Low Byte

Registers

R27

X-register High Byte

R28

Y-register Low Byte

R29

Y-register High Byte

R30

Z-register Low Byte

R31

Z-register High Byte

ATtiny10 데이터시트(PDF) 8 Page - ATMEL Corporation

ATtiny10 데이터시트(HTML) 8 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL