| 전자부품 데이터시트 검색엔진 |
|
bq20z45-R1DBTR 데이터시트(PDF) 4 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
bq20z45-R1DBTR 데이터시트(HTML) 4 Page - Texas Instruments |
|
4 / 18 page ![]() bq20z45-R1 SLUS992 – DECEMBER 2009 www.ti.com ABSOLUTE MAXIMUM RATINGS over operating free-air temperature (unless otherwise noted) (1) PIN UNIT BAT, VCC –0.3 V to 34 V PACK, PMS –0.3 V to 34 V VSS Supply voltage range VC(n)-VC(n+1); n = 1, 2, 3, 4 –0.3 V to 8.5 V VC1, VC2, VC3, VC4 –0.3 V to 34 V VC5 –0.3 V to 1 V PFIN, SMBD, SMBC –0.3 V to 6 V TS1, TS2, SAFE, VCELL+, PRES; ALERT –0.3 V to V(REG25) + 0.3 V VIN Input voltage range MRST, GSRN, GSRP, RBI –0.3 V to V(REG25) + 0.3 V ASRN, ASRP –1 V to 1 V DSG, CHG, GPOD –0.3 V to 34 V ZVCHG –0.3 V to V (BAT) VOUT Output voltage range TOUT, ALERT, REG33 –0.3 V to 6 V RESET –0.3 V to 7 V REG25 –0.3 V to 2.75 V ISS Maximum combined sink current for input pins PRES, PFIN, SMBD, SMBC 50 mA TA Operating free-air temperature range –40°C to 85°C TF Functional temperature –40°C to 100°C Tstg Storage temperature range –65°C to 150°C (1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS over operating free-air temperature range (unless otherwise noted) PIN MIN NOM MAX UNIT VSS Supply voltage VCC, BAT 4.5 25 V V(STARTUP) Minimum startup voltage VCC, BAT, PACK 5.5 V VC(n)-VC(n+1); n = 1,2,3,4 0 5 V VC1, VC2, VC3, VC4 0 VSS V VIN Input Voltage Range VC5 0 0.5 V ASRN, ASRP –0.5 0.5 V PACK, PMS 0 25 V V(GPOD) Output Voltage Range GPOD 0 25 V I(GPOD) Drain Current(1) GPOD 1 mA C(REG25) 2.5V LDO Capacitor REG25 1 µF C(REG33) 3.3V LDO Capacitor REG33 2.2 µF C(VCELL+) Cell Voltage Output Capacitor VCELL+ 0.1 µF R(PACK) PACK input block resistor(2) PACK 1 k Ω (1) Use an external resistor to limit the current to GPOD to 1mA in high voltage application. (2) Use an external resistor to limit the inrush current PACK pin required. 4 Submit Documentation Feedback Copyright © 2009, Texas Instruments Incorporated Product Folder Link(s): bq20z45-R1 |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |