HT86B05 datasheet(70/79 Pages) HOLTEK

70 / 79 page

SWAP [m]

Swap nibbles of Data Memory

Description

The low-order and high-order nibbles of the specified Data Memory are interchanged.

Operation

[m].3~[m].0

« [m].7 ~ [m].4

Affected flag(s)

None

SWAPA [m]

Swap nibbles of Data Memory with result in ACC

Description

The low-order and high-order nibbles of the specified Data Memory are interchanged. The

result is stored in the Accumulator. The contents of the Data Memory remain unchanged.

Operation

ACC.3 ~ ACC.0

¬ [m].7 ~ [m].4

ACC.7 ~ ACC.4

¬ [m].3 ~ [m].0

Affected flag(s)

None

SZ [m]

Skip if Data Memory is 0

Description

If the contents of the specified Data Memory is 0, the following instruction is skipped. As

this requires the insertion of a dummy instruction while the next instruction is fetched, it is a

two cycle instruction. If the result is not 0 the program proceeds with the following instruc-

tion.

Operation

Skip if [m] = 0

Affected flag(s)

None

SZA [m]

Skip if Data Memory is 0 with data movement to ACC

Description

The contents of the specified Data Memory are copied to the Accumulator. If the value is

zero, the following instruction is skipped. As this requires the insertion of a dummy instruc-

tion while the next instruction is fetched, it is a two cycle instruction. If the result is not 0 the

program proceeds with the following instruction.

Operation

ACC

¬ [m]

Skip if [m] = 0

Affected flag(s)

None

SZ [m].i

Skip if bit i of Data Memory is 0

Description

If bit i of the specified Data Memory is 0, the following instruction is skipped. As this re-

quires the insertion of a dummy instruction while the next instruction is fetched, it is a two

cycle instruction. If the result is not 0, the program proceeds with the following instruction.

Operation

Skip if [m].i = 0

Affected flag(s)

None

TABRDC [m]

Read table (current page) to TBLH and Data Memory

Description

The low byte of the program code (current page) addressed by the table pointer (TBLP) is

moved to the specified Data Memory and the high byte moved to TBLH.

Operation

[m]

¬ program code (low byte)

TBLH

¬ program code (high byte)

Affected flag(s)

None

TABRDL [m]

Read table (last page) to TBLH and Data Memory

Description

The low byte of the program code (last page) addressed by the table pointer (TBLP) is

moved to the specified Data Memory and the high byte moved to TBLH.

Operation

[m]

¬ program code (low byte)

TBLH

¬ program code (high byte)

Affected flag(s)

None

HT86BXX/HT86BRXX

Rev. 1.60

October 20, 2009

HT86B05 데이터시트(PDF) 70 Page - Holtek Semiconductor Inc

HT86B05 데이터시트(HTML) 70 Page - Holtek Semiconductor Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

데이터시트 다운로드

링크 URL