www.austriamicrosystems.com/AS1360

Revision 1.04

2 - 12

AS1360

Datasheet - P i n o u t and Pa ckag ing

4 Pinout and Packaging

Pin Assignments

Figure 2. Pin Assignments (Top View)

Pin Descriptions

Table 1. Pin Descriptions

Pin Number

Pin Name

Description

1GND

Ground. This pin should be connected to the negative side of the output and

the negative terminal of the input capacitor. No high-current flows out of this

pin, only bias current (1.5µA, typ).

Note: Voltage drops between this pin and the negative side of the load

should be minimized.

2VOUT

Regulated Output Voltage. This pin should be connected to the positive

side of the load and the positive terminal of the output capacitor. Current

flowing out of this pin is equivalent DC load current.

Note: The positive side of the output capacitor should be mounted as close

as is practical to this pin.

3VIN

Unregulated Input Voltage. This pin should be connected to the positive

terminal of the input capacitor.

Note: The input capacitor should be mounted as close as is practical to this

pin.

3

1

3-pin SOT23

VIN

GND

VOUT

2

AS1360