386

Solid State Relay

G3MB

■ Approvals

UL Recognized (File No. E64562) - - Ambient Temp. = 40

°C

CSA Certified (File No. LR35535)

Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics

individually defined in this catalog.

2. In the interest of product improvement, specifications are subject to change.

Precautions

See General Information Section near the back of this catalog for

Solid State Precautions.

Make sure that the space between the bottom of the relay and the

PCB is 0.1 mm or less. When making holes on the PCB for the

relay’s edge terminals, the hole diameters should be slightly smaller

than the actual diameters of the edge terminals. This will reduce

unnecessary space between the bottom of the relay and the PCB.

To use the SSR output for phase control, select a model that does

not incorporate a zero-cross function.

The SSR case serves to dissipate heat. When mounting more than

three SSRs as a group, pay attention to the ambient temperature rise

and install the Relays so that they are adequately ventilated. If poor

ventilation is unavoidable, reduce the load current by half.

Protective Component

The input circuitry does not incorporate a circuit protecting the SSR

from being damaged due to a reversed connection. Make sure that

the polarity is correct when connecting the input lines.

Protective Element

No overvoltage absorption element is built in. Therefore, if the G3MB

is connected to an inductive load, be sure to connect the overvoltage

absorption element.

SSR Type

Input voltage

Load type

Load ratings

G3MB-102P

5 to 24 VDC

General purpose

2 A, 120 VAC

Tungsten

1 A, 120 VAC

Motor

1.60 FLA/9.60 LRA, 120 VAC

G3MB-202P

General purpose

2 A, 240 VAC

G3MB-202PL

Tungsten

1 A, 240 VAC

G3MB-202PEG

Motor

1.60 FLA/9.60 LRA, 240 VAC

G3MB-202PLEG

SSR Type

Input voltage

Load type

Load ratings

G3MB-102P

5 to 24 VDC

General purpose

2 A, 120 VAC

Tungsten

1 A, 120 VAC

Motor

1.60 FLA/8.60 LRA, 120 VAC

G3MB-202P

General purpose

2 A, 240 VAC

G3MB-202PL

Tungsten

1 A, 240 VAC

Motor

1.60 FLA/8.60 LRA, 240 VAC