| 전자부품 데이터시트 검색엔진 |
|
HT68F20 데이터시트(PDF) 13 Page - Holtek Semiconductor Inc |
|
|
|||||||||||||||||||||||||||||
HT68F20 데이터시트(HTML) 13 Page - Holtek Semiconductor Inc |
|
13 / 232 page ![]() Absolute Maximum Ratings Supply Voltage ...........................VSS -0.3V to VSS+6.0V Storage Temperature ............................ -50°Cto125°C Input Voltage..............................VSS -0.3V to VDD+0.3V Operating Temperature........................... -40°Cto85°C IOL Total ................................................................80mA IOH Total.............................................................. -80mA Total Power Dissipation .....................................500mW Note: These are stress ratings only. Stresses exceeding the range specified under ²Absolute Maximum Ratings² may cause substantial damage to the device. Functional operation of this device at other conditions beyond those listed in the specification is not implied and prolonged exposure to extreme conditions may affect device reliability. D.C. Characteristics Ta=25 °C Symbol Parameter Test Conditions Min. Typ. Max. Unit VDD Conditions VDD Operating Voltage (HXT, ERC, HIRC) ¾ fSYS=8MHz 2.2 ¾ 5.5 V fSYS=12MHz 2.7 ¾ 5.5 V fSYS=20MHz 4.5 ¾ 5.5 V IDD1 Operating Current, Normal Mode, fSYS=fH (HXT, ERC, HIRC) 3V No load, fSYS=fH=4MHz, WDT enable ¾ 0.7 1.1 mA 5V ¾ 1.8 2.7 mA 3V No load, fSYS=fH=8MHz, WDT enable ¾ 1.6 2.4 mA 5V ¾ 3.3 5.0 mA 3V No load, fSYS=fH=12MHz, WDT enable ¾ 2.2 3.3 mA 5V ¾ 5.0 7.5 mA IDD2 Operating Current, Normal Mode, fSYS=fH (HXT) 5V No load, fSYS=fH=20MHz, WDT enable ¾ 6.0 9.0 mA IDD3 Operating Current, Slow Mode, fSYS=fL (LXT, LIRC) 3V No load, fSYS=fL, WDT enable ¾ 10 20 mA 5V ¾ 30 50 mA IIDLE0 IDLE0 Mode Standby Current (LXT or LIRC on) 3V No load, WDT enable ¾ 1.5 3.0 mA 5V ¾ 3.0 6.0 mA IIDLE1 IDLE1 Mode Standby Current (HXT, ERC, HIRC) 3V No load, WDT enable, fSYS=12MHz on ¾ 0.55 0.83 mA 5V ¾ 1.30 2.00 mA ISLEEP0 SLEEP0 Mode Standby Current (LXT and LIRC off) 3V No load, WDT disable ¾¾ 1 mA 5V ¾¾ 2 mA ISLEEP1 SLEEP1 Mode Standby Current (LXT or LIRC on) 3V No load, WDT enable ¾ 1.5 3.0 mA 5V ¾ 2.5 5.0 mA VIL1 Input Low Voltage for I/O Ports or Input Pins except RES pin ¾¾ 0 ¾ 0.3VDD V VIH1 Input High Voltage for I/O Ports or Input Pins except RES pin ¾¾ 0.7VDD ¾ VDD V VIL2 Input Low Voltage (RES) ¾¾ 0 ¾ 0.4VDD V VIH2 Input High Voltage (RES) ¾¾ 0.9VDD ¾ VDD V HT68F20/HT68F30/HT68F40/HT68F50/HT68F60 HT68FU30/HT68FU40/HT68FU50/HT68FU60 Rev. 1.10 13 February 1, 2010 |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |