| 전자부품 데이터시트 검색엔진 |
|
SS7519 데이터시트(PDF) 1 Page - Silicon Standard Corp. |
|
|
|||||||||||||||||||||||||||||
SS7519 데이터시트(HTML) 1 Page - Silicon Standard Corp. |
|
1 / 5 page ![]() www.SiliconStandard.com 1 of 5 SS7519 FEATURES !" Meets SCSI-1, SCSI-2, Ultra3 and Ultra320 Standards. !" Auto-selectable Multimode single-ended or Low Voltage Differential termination. !" Current limit and thermal shutdown protection. !" Ground driver integrated for single-ended operation !" Compatible with active-negation drivers. DESCRIPTION The SS7519 multimode SCSI terminator is both a single-ended and a low voltage differential terminator that meets the specification s of SCSI Parallel Interface (SPI-4). The SS7519 also provides backward compatibility to the SCSI-1, SCSI-2 and Single-Ended specification s. The Multimode terminator contains all the functions required to terminate and auto detect for SCSI devices without hardware fluctuation. Auto-Selectable is achieved by using voltage detection on the DIFFSENSE signal. The SS7519 senses the DIFFSENSE line while sourcing the DIFFSENSE signal with LVD levels. The DIFFSENSE line being grounded indicates that one or more SE devices are attached on the bus. The SS7519 switches to the termination mode that is appropriate for the bus based on the value of the DIFFSENSE input voltage. For the Single-Ended termination, the active terminator will pull RXN to 2.85V and RXP to a hard ground. The SS7519 can sink 22mA per line as required by the SCSI specification. The Single-Ended resistor will maintain 110Ω ± 5%. For LVD termination, the SS7519 integrates two current sources with nine accuracy resistor strings. This architecture yields a 105Ω ±5% differential and 226Ω ±10% common mode impedance. A fail-safe bias of 110mV is sustained when no drivers are connected to the SCSI bus. If the SS7519 detects a HVD SCSI device on the bus, all the signals will be set to a high impedance state. TPWR TPWR R9N R8N HS GND R7N R7P R6N R6P DIFF_CAP DIFFSENSE M/S R9P R8P VRFF RIP RIN R2P R2N HS GND R3P R3N R4P R4N R5P ISO GND R5N SS7519 - TSSOP28 1 2 3 4 5 6 7 8 9 10 11 12 13 14 28 27 26 25 24 23 22 21 20 19 18 17 16 15 Multi-mode SCSI Terminator Rev.2.01 6/06/2003 |
유사한 부품 번호 - SS7519 |
|
유사한 설명 - SS7519 |
|
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |