HAL710 datasheet(5/19 Pages) MICRONAS

5 / 19 page

DATA SHEET

HAL 710, HAL 730

Micronas

Oct. 13, 2009; DSH000031_002EN

1.3. Marking Code

All Hall sensors have a marking on the package sur-

face (branded side). This marking includes the name

of the sensor and the temperature range.

1.4. Operating Junction Temperature Range

The Hall sensors from Micronas are specified to the

chip temperature (junction temperature TJ).

K: TJ = −40 °C to +140 °C

E: TJ = −40 °C to +100 °C

Note: Due to power dissipation, there is a difference

between the ambient temperature (TA) and junc-

tion temperature. Please refer to section 5.1. on

page 17 for details.

Hall sensors are available in a wide variety of packag-

ing versions and quantities. For more detailed informa-

tion, please refer to the brochure: “Hall Sensors:

Ordering Codes, Packaging, Handling”.

1.6. Solderability and Welding

Solderability

During

soldering

reflow

processing

and

manual

reworking, a component body temperature of 260

°C

should not be exceeded.

Welding

Device terminals should be compatible with laser and

resistance welding. Please note that the success of

the welding process is subject to different welding

parameters which will vary according to the welding

technique used. A very close control of the welding

parameters is absolutely necessary in order to reach

satisfying results. Micronas, therefore, does not give

any implied or express warranty as to the ability to

weld the component.

1.7. Pin Connections

Fig. 1–1: Pin configuration

Type

Temperature Range

HAL 710

710K

710E

HAL 730

730K

730E

HALXXXPA-T

Temperature Range: K or E

Package: SF for SOT89B-2

Type: 710

Example: HAL710SF-K

→ Type: 710

→ Package: SOT89B-2

→ Temperature Range: T

J = −40 °C to +140 °C

1 VDD

4GND

3 Count Output

2 Direction Output

HAL710 데이터시트(PDF) 5 Page - Micronas

HAL710 데이터시트(HTML) 5 Page - Micronas

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

데이터시트 다운로드

링크 URL