| 전자부품 데이터시트 검색엔진 |
|
MC9S08DN60F1CLF 데이터시트(PDF) 57 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MC9S08DN60F1CLF 데이터시트(HTML) 57 Page - Freescale Semiconductor, Inc |
|
57 / 356 page ![]() Chapter 4 Memory MC9S08DN60 Series Data Sheet, Rev 3 Freescale Semiconductor 57 if PRDIV8 = 0 — fFCLK = fBus ÷ (DIV + 1) Eqn. 4-1 if PRDIV8 = 1 — fFCLK = fBus ÷ (8 × (DIV + 1)) Eqn. 4-2 Table 4-7 shows the appropriate values for PRDIV8 and DIV for selected bus frequencies. 4.5.11.2 Flash and EEPROM Options Register (FOPT and NVOPT) During reset, the contents of the nonvolatile location NVOPT are copied from Flash into FOPT. To change the value in this register, erase and reprogram the NVOPT location in Flash memory as usual and then issue a new MCU reset. Table 4-6. FCDIV Register Field Descriptions Field Description 7 DIVLD Divisor Loaded Status Flag — When set, this read-only status flag indicates that the FCDIV register has been written since reset. Reset clears this bit and the first write to this register causes this bit to become set regardless of the data written. 0 FCDIV has not been written since reset; erase and program operations disabled for Flash and EEPROM. 1 FCDIV has been written since reset; erase and program operations enabled for Flash and EEPROM. 6 PRDIV8 Prescale (Divide) Flash and EEPROM Clock by 8 (This bit is write once.) 0 Clock input to the Flash and EEPROM clock divider is the bus rate clock. 1 Clock input to the Flash and EEPROM clock divider is the bus rate clock divided by 8. 5:0 DIV Divisor for Flash and EEPROM Clock Divider — These bits are write once. The Flash and EEPROM clock divider divides the bus rate clock (or the bus rate clock divided by 8 if PRDIV8 = 1) by the value in the 6-bit DIV field plus one. The resulting frequency of the internal Flash and EEPROM clock must fall within the range of 200 kHz to 150 kHz for proper Flash and EEPROM operations. Program/Erase timing pulses are one cycle of this internal Flash and EEPROM clock which corresponds to a range of 5 μs to 6.7 μs. The automated programming logic uses an integer number of these pulses to complete an erase or program operation. See Equation 4-1 and Equation 4-2. Table 4-7. Flash and EEPROM Clock Divider Settings fBus PRDIV8 (Binary) DIV (Decimal) fFCLK Program/Erase Timing Pulse (5 μs Min, 6.7 μs Max) 20 MHz 1 12 192.3 kHz 5.2 μs 10 MHz 0 49 200 kHz 5 μs 8 MHz 0 39 200 kHz 5 μs 4 MHz 0 19 200 kHz 5 μs 2 MHz 0 9 200 kHz 5 μs 1 MHz 0 4 200 kHz 5 μs 200 kHz 0 0 200 kHz 5 μs 150 kHz 0 0 150 kHz 6.7 μs |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |