| 전자부품 데이터시트 검색엔진 |
|
PIC24F16KA102 데이터시트(PDF) 64 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC24F16KA102 데이터시트(HTML) 64 Page - Microchip Technology |
|
64 / 254 page ![]() PIC24F16KA102 FAMILY DS39927B-page 62 Preliminary © 2009 Microchip Technology Inc. 7.5.2 DETECTING BOR When BOR is enabled, the BOR bit (RCON<1>) is always reset to ‘1’ on any BOR or POR event. This makes it difficult to determine if a BOR event has occurred just by reading the state of BOR alone. A more reliable method is to simultaneously check the state of both POR and BOR. This assumes that the POR and BOR bits are reset to ‘0’ in the software immediately after any POR event. If the BOR bit is ‘1’ while POR is ‘0’, it can be reliably assumed that a BOR event has occurred. 7.5.3 DISABLING BOR IN SLEEP MODE When BOREN<1:0> = 10, BOR remains under hard- ware control and operates as previously described. However, whenever the device enters Sleep mode, BOR is automatically disabled. When the device returns to any other operating mode, BOR is automatically re-enabled. This mode allows for applications to recover from brown-out situations, while actively executing code, when the device requires BOR protection the most. At the same time, it saves additional power in Sleep mode by eliminating the small incremental BOR current. Note: Even when the device exits from Deep Sleep mode, both the POR and BOR are set. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |