E5GN

8

Models with Analog Inputs

Models with One Control Output and a 100 to 240-VAC Power Supply

Note: Models with analog inputs do not display the temperature unit.

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The number of auxiliary outputs that

can be used will decrease by one. Also, the signal for the control output for the cooling side will be a relay output.

*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control output. (This is not possible

for models without an auxiliary output.) The control output will be a relay output. The number of auxiliary outputs that can be used will decrease

by one.

Models with One Control Output and a 24-VAC/VDC Power Supply

*1. If heating/cooling control mode is used, an auxiliary output is used as a control output for the cooling side. The number of auxiliary outputs that

can be used will decrease by one. Also, the signal for the control output for the cooling side will be a relay output.

*2. A current control output can be used as the transfer output. In that case, an auxiliary output is used as the control output. (This is not possible

for models without an auxiliary output.) The control output will be a relay output. The number of auxiliary outputs that can be used will decrease

by one.

Accessories (Order Separately)

USB-Serial Conversion Cable

Waterproof Packing

Current Transformers (CTs)

CX-Thermo Support Software

Note: The E5GN is supported by CX-Thermo version 4.2 and higher.

Case color

Control

output

Control

mode

*1

No. of

auxiliary

outputs

Detection of

heater

burnout,

SSR failure,

and heater

overcurrent

No. of event

inputs

Transfer

output

*2

Communi

cations

Previous model

New model

Thermocou-

ple input

Resistance

thermome-

ter input

Black

Current

output

Standard or

heating/

cooling

1

---

---

Transfer

output using

control

output

---

---

---

E5GN-C1L-C

Case color

Control

output

Control

mode

*1

No. of

auxiliary

outputs

Detection of

heater

burnout,

SSR failure,

and heater

overcurrent

No. of event

inputs

Transfer

output

*2

Communi

cations

Previous model

New model

Thermocou-

ple input

Resistance

thermome-

ter input

Black

Current

output

Standard or

heating/

cooling

1

---

---

Transfer

output using

control

output

---

---

---

E5GN-C1LD-

C

Model

E58-CIFQ1

Model

Y92S-32

Hole diameter

Model

5.8 dia.

E54-CT1

12.0 dia.

E54-CT3

Model

EST2-2C-MV4