LP324 datasheet(2/12 Pages) TI

2 / 12 page

www.ti.com

VCC

OUT

IN−

IN+

Absolute Maximum Ratings

(1)

ESD Protection

LP324, LP2902

ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS460A – MARCH 2005 – REVISED MAY 2005

SCHEMATIC (EACH AMPLIFIER)

over operating free-air temperature range (unless otherwise noted)

MIN

MAX

UNIT

VCC

Supply voltage range(2)

±16 or 32

VID

Differential input voltage(3)

±32

Input voltage (either input)

–0.3

Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C, VCC ≤ 15 V(4)

Unlimited

D package

Package thermal impedance(5)(6)

N package

°C/W

PW package

113

Operating virtual junction temperature

150

°C

Tstg

Storage temperature range

–65

150

°C

(1)

Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating

conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.

(3)

Differential voltages are at IN+, with respect to IN–.

(4)

Short circuits from outputs to VCC can cause excessive heating and eventual destruction.

(5)

Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.

(6)

The package thermal impedance is calculated in accordance with JESD 51-7.

TEST CONDITIONS

TYP

UNIT

Human-Body Model

±2

LP324 데이터시트(PDF) 2 Page - Texas Instruments

LP324 데이터시트(HTML) 2 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

데이터시트 다운로드

링크 URL