| 전자부품 데이터시트 검색엔진 |
|
SA2532K 데이터시트(PDF) 13 Page - Sames |
|
|
|||||||||||||||||||||||||||||
SA2532K 데이터시트(HTML) 13 Page - Sames |
|
13 / 27 page ![]() AN1500A sames sames sames sames 13/27 14.1 Frequency response shaping: Transmit Fig. 6: Tx signal path Transmit frequency response shaping is performed by 3 resistors for gain setting and 3..4 capacitors for frequency shaping: 14.1.1 Microphone gain setting The electret handset microphone is supplied from the constant voltage at LI (#27), filtered by R20 and C14 (see fig 6). R21 and R23 are the bias resistors of the electret microphone. Transmit gain is set by both selecting the proper microphone type (sensitivity) and by varying R21 & R23. Reasonable values for these resistors are in the range of 1...2.5k Ω (each), which results in a gain adjustment range in the order of 6..8dB. 14.1.2 Tx frequency shaping: Transmit frequency shaping can be done by C11,C13 (high pass) and C12( low pass). R22 can be installed to attenuate the microphone signal without affecting the frequeny response curve, M1(#23) and M2 (#24)are differential inputs of the microphone amplifier. Please note the proper connection of the M1 and M2 inputs in respect to the positive and negative side of the microphone. To find the correct values, a SLR (sending loudness ratings) measurement with the specific handset used in the customer’s application must be made. 14 Further Adjustments |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |