SAP08 datasheet(4/6 Pages) SANKEN

부품명	SAP08

상세설명	Darlington transistors with built-in temperature compensation diodes for audio amplifier applications

PDF	6 Pages

Scroll/Zoom	100%

제조업체	SANKEN [Sanken electric]

홈페이지	http://www.sanken-ele.co.jp/en

Logo

4 / 6 page

1.0

10.0

5.0

500

1000

1500

VF (mV)

IF – VF Characteristics

2000

2500

3000

PN-Di

SBD

(5 diodes Total)

PN–Di+SBD

3. Characteristics of the temperature compensation diodes

The several temperature compensation diodes are connected in series, so the forward voltage is varied with

small current fluctuations. Therefore, in case the forward current flowing over the diodes is set at 2.5mA and

over, the forward voltage rises, and in the worst combinations, the idling current reaches to 40mA and over

with minimum VR of 0

Ω. On the contrary, in case the forward current is set at 2.5mA or below, the idling

current may not reach to 40mA with maximum VR of 200

Ω.

4. Parallel push-pull application

Adjustments of the idling current are required by each the resistor in parallel push-pull applications. One

side adjustment will cause the idling current to be unstable (seesaw operation) because of the different hFE.

Ta=25

°C

To be adjusted individually

SAP08 데이터시트(PDF) 4 Page - Sanken electric