Shenzhen KYL Communication Equipment Co., Ltd

www.rf-data.com

Fax: 86-755-83408785

sales02@rf-data.com

6

every two seconds, the GPS is standby. When the blue indicator is off, the

tracker is working but doesn’t get position yet. If the tracker gets the

position, the blue indicator will be on all the time.

2. The blue indicator (in the middle) is the charge led. The indicator blinks

means the device is on charge. After the device is full of electricity, the

indicator will be on all the time.

3. The red indicator (on the right) represents GSM working status. Red

indicator blinks, GSM is working. If you want to test the device, please

put it outside of the window.

● Test this device by a mobile phone:

When the device receives GPS signals and GPS position normally, you

can use it and do all the following settings.

5.4 Initialization

Send “begin+password” in SMS to the device, it will reply “begin ok” and

initialize all the settings. (Default password: 123456)

5.5 Quick set up

5. 5. 1 Test device by mobile phone:

to your mobile phone.

3. Two ways to test the device.

a. Call the number (the SIM card number in the device), the device will cut