I2C Interface Characteristics V

The following specifications apply for A

apply for T

Symbol

Parameter

Conditions

LM48823

Units

(Limits)

Typical

(Note 6)

Limits (Note 7)

t

1

SCL period

2.5

μs (min)

t

2

SDA Setup Time

100

ns (min)

t

3

SDA Stable Time

0

ns (min)

t

4

Start Condition Time

100

ns (min)

t

5

Stop Condition Time

100

ns (min)

V

IH

Logic High Input Threshold

DD

V (min)

V

IL

Logic Low Input Threshold

DD

V (max)

Note 1: :. “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability

and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in

the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the

device should not be operated beyond such conditions. All voltages are measured with respect to the ground pin, unless otherwise specified.

Note 2: The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as otherwise modified

or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not guaranteed.

Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by T

allowable power dissipation is P

Note 4: Human body model, applicable std. JESD22-A114C.

Note 5: Machine model, applicable std. JESD22-A115-A.

Note 6: Typical values represent most likely parametric norms at T

characterization and are not guaranteed.

Note 7: Datasheet min/max specification limits are guaranteed by test or statistical analysis.

www.national.com

6