| 전자부품 데이터시트 검색엔진 |
|
DS26521 데이터시트(PDF) 75 Page - Maxim Integrated Products |
|
|
|||||||||||||||||||||||||||||
DS26521 데이터시트(HTML) 75 Page - Maxim Integrated Products |
|
75 / 258 page ![]() DS26521 Single T1/E1/J1 Transceiver 75 of 258 8.11.3.5 ANSI T1.231 for T1 and J1 Modes For short-haul mode, loss is declared if the received signal level is 3dB lower from the programmed value (based on Table 9-19) for a duration of 192-bit periods. Hence, if the sensitivity is programmed to be 12dB, loss will be declared at 15dB. LOS is reset if the following criteria are met: 1) 24 or more ones are detected in 192-bit period with a programmed sensitivity level measured at RTIP and RRING. 2) During the 192 bits, fewer than 100 consecutive zeros are detected. For long-haul mode, loss is detected if the received signal level is 3dB lower from the programmed value (based on Table 9-19) for a duration of 192-bit periods. Hence, if the sensitivity is programmed at 30dB, loss declaration level will be 33dB. LOS is reset if the following criteria are met: 1) 24 or more ones are detected in 192-bit period with a programmed sensitivity level measured at RTIP and RRING. 2) During the 192 bits, fewer than 100 consecutive zeros are detected. 8.11.3.6 ITU-T G.775 for E1 Modes For short-haul mode, loss is declared if the received signal level is 3dB lower from the programmed value (based on Table 9-19) for a duration of 192-bit periods. Hence, if the sensitivity is programmed to be 12dB, loss will be declared at 15dB. LOS is reset if the receive signal level is greater than or equal to the programmed sensitivity level for a duration of 192-bit periods. For long-haul mode, loss is detected if the received signal level is 3dB lower from the programmed value (based on Table 9-19) for a duration of 192-bit periods. Hence, if the sensitivity is programmed at 30dB, loss declaration level will be 33dB. LOS is reset if the receive signal level is greater than or equal to the programmed sensitivity level for a duration of 192-bit periods. 8.11.3.7 ETS 200 233 for E1 Modes For short-haul mode, loss is declared if the received signal level is 3dB lower from the programmed value (based on Table 9-19) continuous duration of 2048-bit periods (1ms). LOS is reset if the receive signal level is greater than or equal to programmed sensitivity level for a duration of 192-bit periods. For long-haul mode, loss is declared if the received signal level is 3dB lower from the programmed value (based on Table 9-19) continuous duration of 2048-bit periods (1ms). LOS is reset if the receive signal level is greater than or equal to the programmed sensitivity level for a duration of 192-bit periods. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |