CLP200M datasheet(5/21 Pages) STMICROELECTRONICS

5 / 21 page

Obsolete

Product(s)

- Obsolete

Product(s)

CLP200M

5/21

R sense

Overvoltage

reference

(+/- 215 V)

Overvoltage

detector

Overcurrent

detector

TIPL

TIPS

SW3 SW1

Fuse

TIP

GND

ILG

VLG

1/2 CLP200M

ILG

VLG

-215

+215

2.3 Ringing mode

Fig. 4 : Switching by voltage during ringing mode.

RINGS

R sense

Overvoltage

reference

(+/- 215 V)

Overvoltage

detector

Overcurrent

detector

Overvoltage

reference

(+/- 215 V)

Overvoltage

detector

Overcurrent

detector

TIPL

TIPS

RINGL

GND

SW3 SW1

SW4 SW2

Rsense

Fuse

TIP

RING

VZ1

VZ2

VZ3

VZ4

Fig. 5a : Method to adjust the reference voltage.

In ringing mode (Ring relay in position 2), the only

protection device involved is the CLP200M.

In normal conditions, the CLP200M operates in re-

gion 1 of A1 curve, and is idle.

If an overvoltage occuring between TIP (or RING)

and

GND

reaches

the

internal

overvoltage

refe-rence (+/- 215V), the CLP200M acts and the

line is short-circuited to GND. At this time the oper-

ating point moves to region 2 for positive surges

(region 3 for negative surges). Once the surge cur-

rent disappears, the device returns to its initial

state (region 1).

For surges occuring between TIP and RING, the

CLP200M acts in the same way. This means that

the CLP200M ensures a tripolar protection.

When used alone, the CLP200M acts at the inter-

nal overvoltage reference level (+/- 215V). Fur-

thermore, it is possible to adjust this threshold level

to a lower voltage by using :

. up to 4 fixed external voltage reference (V

Z1 to

VZ4) (see fig.5a).

CLP200M 데이터시트(PDF) 5 Page - STMicroelectronics

CLP200M 데이터시트(HTML) 5 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

데이터시트 다운로드

링크 URL