Evaluation Kit for CMX602B

EV6021

 2000 Consumer Microcircuits Limited

4

UM6021/4

1.2

Preliminary Information

1.2.1

Laboratory Equipment

The following laboratory equipment is needed to use this evaluation kit:

1.2.1.1

8 - 14V DC Power Supply.

1.2.1.2

Caller ID Simulator

1.2.1.3

Speech Source

If the user wishes to control the EV6021 from a PC and/or re-program the PIC on the board.

1.2.1.4

An IBM compatible PC; 20MHz '386 or better, running Microsoft Windows

 3.11 / '95 /NT. The re-

programming software supplied (PICPROGA.EXE) runs most efficiently under DOS and cannot be

used with Windows NT.

1.2.2

Handling Precautions

Like most evaluation kits, this product is designed for use in laboratory environments. The following

practices will help ensure its proper operation.

1.2.2.1

Static Protection

This product uses low power CMOS circuits which may be damaged by electrostatic discharge.

Partially damaged circuits may function erroneously, leading to misleading results. Observe ESD

precautions at all times when handling this product.

1.2.2.2

Contents - Unpacking

Please ensure that you have received all of the items listed on the separate information sheet

(EK6021) and notify CML within 7 working days if the delivery is incomplete.

1.2.3

Telephone Line Connection

This Evaluation Kit is not approved for direct or indirect connection to any public

telecommunication system. Users are advised to observe local statutory requirements which

may apply to this product.