전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

MCP2030A 데이터시트(PDF) 49 Page - Microchip Technology

부품명 MCP2030A
상세설명  Three-Channel Analog Front-End Devicewith 1 mVPP Input Detection Sensitivity
PDF  74 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  MICROCHIP [Microchip Technology]
홈페이지  http://www.microchip.com
Logo MICROCHIP - Microchip Technology

MCP2030A 데이터시트(HTML) 49 Page - Microchip Technology

Back Button MCP2030A Datasheet HTML 45Page - Microchip Technology MCP2030A Datasheet HTML 46Page - Microchip Technology MCP2030A Datasheet HTML 47Page - Microchip Technology MCP2030A Datasheet HTML 48Page - Microchip Technology MCP2030A Datasheet HTML 49Page - Microchip Technology MCP2030A Datasheet HTML 50Page - Microchip Technology MCP2030A Datasheet HTML 51Page - Microchip Technology MCP2030A Datasheet HTML 52Page - Microchip Technology MCP2030A Datasheet HTML 53Page - Microchip Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 49 / 74 page
background image
2011 Microchip Technology Inc.
DS22235B-page 49
MCP2030A
Related Configuration Register Bits:
• Configuration Register 1 (Register 5-2),
DATOUT<8:7>:
bit 8 bit 7
00
: Demodulated Output
01
: Carrier Clock Output
10
: RSSI Output
11
: RSSI Output
• Configuration Register 2 (Register 5-3),
RSSIFET<8>:
0
: Pull-Down MOSFET off
1
: Pull-Down MOSFET on.
• Configuration Register 0 (Register 5-1): all bits
are affected.
5.30.3.1
ANALOG-TO-DIGITAL DATA
CONVERSION OF RSSI SIGNAL
The RSSI output is an a nalog current. It needs an
external analog-to-digital (ADC) data conversion
device for digitized output. The ADC data conversion
can be accomplished by using a stand-alone external
ADC device, an external MCU that has internal ADC
features, or an external MCU that has no ADC features
but instead uses firmware. The RSSIFET is used to dis-
charge any external charge on the LFDATA pin in the
RSSI Output mode. The MOSFET can be turned on or
off with bit RSSIFET<8> of C onfiguration Register 2
(Register 5-3). When it is turned on, the internal MOS-
FET provides a discharge path for the external capaci-
tor that is connected at the LFDATA pin. This MOSFET
option is valid only if RSSI output is selected and not
controllable by users for demodulated or carrier clock
output options.
See separate application notes for various external
ADC implementation methods for this device.
See Figure 5-8 for RSSI output path.
FIGURE 5-8:
RSSI Output Path.
Note:
The pull-down MOSFET option is valid
only when the RSSI output is selected.
The MOSFET is not controllable by users
when demodulated or carrier clock output
option is selected.
RSSI Output Current
Generator
VDD
RSSI Pull-down MOSFET (controlled by Config. 2, bit 8)
Current Output
LFDATA/CCLK Pin
RSSIFET(1)
Off
if RSSI active
RSSI Pin
Note
1:
The RSSIFET is used to discharge any external capacitor that is connected at the LFDATA pin.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com