MCP3302 datasheet(14/48 Pages) MICROCHIP

14 / 48 page

MCP3302/04

DS21697F-page 14

 2011 Microchip Technology Inc.

3.7

Analog Ground (AGND)

Ground connection to internal analog circuitry. To

ensure accuracy, this pin must be connected to the

same ground as DGND. If an analog ground plane is

available, it is recommended that this device be tied to

the analog ground plane in the circuit. See

Section 5.6

“Layout Considerations” for more information

regarding circuit layout.

3.8

Voltage Reference (VREF)

This input pin provides the reference voltage for the

device, which determines the maximum range of the

analog input signal and the LSB size.

The LSB size is determined according to the equation

shown below. As the reference input is reduced, the

LSB size is reduced accordingly.

EQUATION 3-1:

When using an external voltage reference device, the

system designer

should

always

refer

the

manufacturer’s recommendations for circuit layout.

Any instability in the operation of the reference device

will have a direct effect on the accuracy of the ADC

conversion results.

3.9

Power Supply (VDD)

The device can operate from 2.7V to 5.5V, but the data

conversion performance is from 4.5V to 5.5V supply

range. To ensure accuracy, a 0.1 µF ceramic bypass

capacitor should be placed as close as possible to the

pin. See

Section 5.6 “Layout Considerations” for

more information regarding circuit layout.

LSB Size =

2 x VREF

8192

MCP3302 데이터시트(PDF) 14 Page - Microchip Technology

MCP3302 데이터시트(HTML) 14 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48

데이터시트 다운로드

링크 URL