5 / 18 page
REJ05B0814-0110 Rev.1.10
2007.12
Page 5 of 18
M16C/26A Group
Sample Program (Remote Control Transmission/Reception)
6.
Operational Specification
<Remote control transmission>
When a switch is depressed, the remote control code (hex code) corresponding to the switch and the inverted data (hex code) of the remote
control code are transmitted. While a switch is held down, data is transmitted successively at 100 millisecond intervals.
Note: In this program, pressing two or more switches at the same time has no effect (i.e., ignored).
<Remote control reception>
(1) Immediately after the reset switch is depressed, the LCD
shows “-----.”
(2) While remote control code is being received, the LCD shows
the received code.
* If the length of reception period is less than or equal to 500 ms,
the received code is displayed for 500 ms.
(1) Reset switch depressed
(2) Reception underway
(e.g., SW3 held down)
(3) 500 ms after reception
R C
-
V
-
-
I R -
T R A N S
-
R C
-
V
-
-
I R -
T R A N S
-
R C
0
V
1- F
I R -
T R A N S
E
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
