1

E-Series Mixer

0.5-500 MHz

MAMXES0108

Rev. V3

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.43537383

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

•

Up to +1dBm RF

•

+3-5 dBm LO Drive

•

Low Profile

•

Tape and reel packaging available

•

260°C Reflow Compatible

Description

M/A-COM Technology Solutions MAMXES0108 is a

Low Cost, Broadband, high performance Double Bal-

anced Mixer designed for use in high volume wireless

applications. The device has been optimised by careful

selection of the Schottky Diode and Balun Transformer

for excellent performance. MAMXES0108 is available

in an SM-89 surface mount package and reflows using

standard soldering.

Product Image

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

Pin Configuration

Function

Pin No.

LO

1

RF

4

IF

5

GND

2,3,6

Component Dimensions

Absolute Maximum Ratings

1,2

Parameter

Absolute Maximum

Impedance

50 Ohms nominal

Operating Temperature

-40°C to +85°C

Storage Temperature

-55°C to +125°C

Internal Load Dissipation

0.125 Watt

RF Power

1 Watt

1. Exceeding any one or combination of these limits may cause

permanent damage to this device.

2. M/A-COM does not recommend sustained operation near

these survivability limits.