Synthesizer, SMT for RFID

Covering all UHF Bands

Rev. V2

MASY-007028-000100

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

4

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Absolute Maximum Ratings

12,13

Parameter

Absolute Maximum

VDD1 to GND

-0.3V to +3.9V

VDD2 to GND

-0.3V to +6.0V

CLK, DATA, LE, MUXOUT

-0.3V to VDD1 + 0.3V

Operating Temperature

-30°C to +70°C

Storage Temperature

-40°C to +125°C

12. Exceeding any one or combination of these limits may cause

permanent damage to this device.

13. M/A-COM does not recommend sustained operation near

these survivability limits.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Silicon and Gallium Arsenide Integrated Circuits

are sensitive to electrostatic discharge (ESD) and

can be damaged by static electricity. Proper ESD

control techniques should be used when handling

these devices.

Pin Configuration

Pin No.

Function

Pin No.

Function

1

GND

21

GND

2

GND

22

GND

3

GND

23

GND

4

GND

24

GND

5

RX_LO

25

CLK

6

GND

26

DATA

7

GND

27

LE

8

TX_LO

28

VDD1

11

9

GND

29

MUXOUT

10

GND

30

CE

11

VDD1

11

31

GND

12

GND

32

VDD1

11

13

GND

33

GND

14

GND

34

GND

15

GND

35

VDD2

16

GND

36

GND

17

GND

37

GND

18

GND

38

GND

19

GND

39

GND

20

GND

40

GND

11. Pins 11, 28, and 32 are not tied together on the synthesizer.

They all must be tied together on the PC Board