 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
CC2500-RTR1 데이터시트(PDF) 9 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
CC2500-RTR1 데이터시트(HTML) 9 Page - Texas Instruments |
|
|
9 / 96 page  CC2500 SWRS040C Page 9 of 89 4.2 RF Receive Section Tc = 25 C, VDD = 3.0 V if nothing else stated. All measurement results obtained using the CC2500EM reference design ([4]). Parameter Min Typ Max Unit Condition/Note Digital channel filter bandwidth 58 812 kHz User programmable. The bandwidth limits are proportional to crystal frequency (given values assume a 26.0 MHz crystal). 2.4 kBaud data rate, sensitivity optimized, MDMCFG2.DEM_DCFILT_OFF=0 (2-FSK, 1% packet error rate, 20 bytes packet length, 203 kHz digital channel filter bandwidth) Receiver sensitivity –104 dBm The RX current consumption can be reduced by approximately 1.7 mA by setting MDMCFG2.DEM_DCFILT_OFF =1. The typical sensitivity is then -102 dBm and the temperature range is from 0 oC to +85 oC. The sensitivity can be improved to typically –106 dBm with MDMCFG2.DEM_DCFILT_OFF=0 by programming registers TEST2 and TEST1 (see page 82). The temperature range is then from 0 oC to +85oC. Saturation –13 dBm Adjacent channel rejection 23 dB Desired channel 3 dB above the sensitivity limit. 250 kHz channel spacing Alternate channel rejection 31 dB Desired channel 3 dB above the sensitivity limit. 250 kHz channel spacing See Figure 22 for plot of selectivity versus frequency offset Blocking ±10 MHz offset ±20 MHz offset ±50 MHz offset 64 70 71 dBm dBm dBm Wanted signal 3 dB above sensitivity level. Compliant with ETSI EN 300 440 class 2 receiver requirements. 10 kBaud data rate, sensitivity optimized, MDMCFG2.DEM_DCFILT_OFF=0 (2-FSK, 1% packet error rate, 20 bytes packet length, 232 kHz digital channel filter bandwidth) Receiver sensitivity –99 dBm The RX current consumption can be reduced by approximately 1.7 mA by setting MDMCFG2.DEM_DCFILT_OFF =1. The typical sensitivity is then -97 dBm The sensitivity can be improved to typically –101 dBm with MDMCFG2.DEM_DCFILT_OFF=0 by programming registers TEST2 and TEST1 (see page 82). The temperature range is then from 0 oC to +85oC. Saturation –9 dBm Adjacent channel rejection 18 dB Desired channel 3 dB above the sensitivity limit. 250 kHz channel spacing Alternate channel rejection 25 dB Desired channel 3 dB above the sensitivity limit. 250 kHz channel spacing See Figure 23 for plot of selectivity versus frequency offset Blocking ±10 MHz offset ±20 MHz offset ±50 MHz offset 59 65 66 dB dB dB Wanted signal 3 dB above sensitivity level. Compliant with ETSI EN 300 440 class 2 receiver requirements. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
