s Precautions for Use

marking portion.

In this case use only the following type of cleaning solvent used for wiping off:

When the cleaning solvents except for specified materials are used, please consult us.

GP1A21

inside the case; therefore,dip cleaning or ultrasonic cleaning are prohibited.

Ethyl alcohol, Methyl alcohol, Isopropyl alcohol.

between Vcc and GND near the device.

( 1) In this product, the PWB is fixed with a resin cover, and cleaning solvent may remain

( 2) Remove dust or stains, using anair blower or soft cloth moistened in cleaning solvent.

( 3) In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01

µ F

( 4) As for other general cautions, refer to the chapter “Precautions for Use .

”

However, do not perform the above cleaning using a soft cloth with cleaning solvevt in the