For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343

Fax: 978-250-3373

Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

11

11 - 8

item

description

J1 - J8

PcB mount sma connector

J9

dc molex connector

c1, c2, c5, c6

100 pF chip capacitor, 0402 Pkg.

c9

10k pF chip capacitor, 0402 Pkg.

c3, c4, c7, c8

10 pF chip capacitor, 0402 Pkg.

c15

4.7 uF, case a, tantulum

u1

Hmc496lP3 / Hmc496lP3e modulator

107309 eval Board

[1] reference this number when ordering complete evaluation PcB

[2] circuit Board material: rogers 4350

Evaluation PCB

the circuit board used in the final application should

use rF circuit design techniques. signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. a sufficient number of via holes should be

used to connect the top and bottom ground planes.

the evaluation circuit board shown is available from

Hittite upon request.

SiGe WIDEBAND DIRECT

MODULATOR RFIC, 4 - 7 GHz

v05.0811