For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

10

10 - 81

HMC697LP4 / 697LP4E

v01.0309

SiGe WIDEBAND DIRECT QUADRATURE

MODULATOR, 200 - 4000 MHz

Pin Number

Function

Description

Interface Schematic

1, 6, 7, 13, 15

N/C

Not connected.

2, 5, 8, 11,

12, 14, 17, 19,

20, 23

GND

These pins and the ground paddle should be

connected to a high quality RF/DC ground.

3, 4

LOP, LON

LO inputs. Need DC decoupling capacitors.

The ports could be driven single ended or differentially.

9, 10

QN, QP

Q channel differential baseband input. These high

impedance ports should be biased around 1.5V DC.

Nominal recommended baseband input is around

1.6V pp differential.

16

RFOUT

DC coupled and matched to 50 Ohms,

output requires blocking capacitor.

18

Vcc1

Supply voltage for the mixer and

output stages 79mA @ +5.0V.

21, 22

IP, IN

I channel differential baseband input.

These high impedance ports should be at the

same bias voltage (VbbDC) as Qn & Qp.

24

Vcc2

Supply voltage for the LO stage 88mA @ +5.0V.

Pin Descriptions