 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
DLD2 데이터시트(PDF) 59 Page - ITT Industries |
|
|
|||||||||||||||||||||||||||||
DLD2 데이터시트(HTML) 59 Page - ITT Industries |
|
|
59 / 76 page  Dimensions are shown in mm (inch) Dimensions subject to change 58 ZIF Connectors Tools and Assembly Assembly Instructions for Square Post Contacts Contact Insertion: Square Post Contacts are factory installed but can be removed and replaced if damaged in service. Step 1. Prior to inserting contacts, actuating handle must be in the maximum open position. Actuating handle will be facing toward connector front face, see Figure 1. Step 2. Contacts are inserted from the insulator front face by hand and are seated and clicked in the cavity by pulling on the terminal post with flat nose pliers, see Figure 2. Figure 1 Figure 2 CONNECTOR FRONT FACE CONTACT RETENTION LANCE Contact Removal for Square Post Contacts Tool: CET-ECP and CET-ECP-1 Place tool over square post terminal and impact tool. Apply sufficient force to collapse retention lance and push contact out of insulator. This process destroys the retention lance. CONTACT RETENTION LANCE |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
