DL4 datasheet(53/76 Pages) ITT

53 / 76 page

Dimensions are shown in mm (inch)

Dimensions subject to change

ZIF Connectors

Contacts

Crimp Contacts — Loose

Loose

µ inch gold contacts:

Recommended for all applications.

Offer the broadest amperage range.

Mandatory for low current applications (less

than 100 milliamps).

Material:

Copper Alloy

Finish:

Gold over nickel

Extraction Tool: 274-7029-007

Insertion Tool: None Required

Plug (Bump)

Receptacle (Flat)

Wire

Accommodation

Plug

µInch Gold

Bump

Receptacle

µInch Gold

Flat

Plug and

Receptacle

µInch Gold

Hand

Tool

(Page 55)

36 thru 38 AWG

—

127000-2207+*

28 thru 32 AWG

030-2416-003

030-2494-001

030-2416-001

24 thru 26 AWG

030-2410-003

030-2492-001

030-2410-001

20 thru 22 AWG

030-2409-003

030-2491-001

030-2409-001

18 thru 20 AWG

030-2415-003

030-2493-001

030-2415-001

Note: For more information on tools and assembly, see pages 54-59.

Non Insulation Support

+ Sold in lots of 100 pieces.

For low current applications (less than 100 milliamps) use 50

µ inch gold (bump) contact on plug side and 50µ inch flat gold (flat) contact on receptacle side.

Contact Factory for tool.

Finish: 20

µ inch gold in mating area/Gold flash on balance (terminating end).

Finish: 20

µ inch gold in mating area/Tin lead on balance (terminating end).

Plug (Bump)

Receptacle (Flat)

BUMP

CONTACT

RETENTION

LANCE

FLAT

CONTACT

RETENTION

LANCE

DL4 데이터시트(PDF) 53 Page - ITT Industries

DL4 데이터시트(HTML) 53 Page - ITT Industries

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

데이터시트 다운로드

링크 URL