0.4Ω Dual SPDT Analog Switch

PA3535/3536

ANALOG PRODUCTS DIVISION

561 E. Elliot Road #175 Chandler, AZ 85225 Tel: (480) 539-2900. Fax: (602) 431-2288

www.protekanalog.com

44

95070 Rev.3. 03/09

NOT FOR USE IN LIFE SUPPORT SYSTEMS

Absolute Maximum Ratings

Reference to Ground

V+……………………………………………….-0.3 to +6.0V

IN, COM, NC, NO…………………….....-0.3 to (V+ +0.3V)

Continuous Current (NO, NC, COM)………….…...300mA

Peak Current………………………………………….500mA

(Pulsed at 1mS, 10% Duty Cycle)

Storage Temperature (D Suffix)………………-65 to 150°C

ESD per Method 3015.7………………………………> 2KV

Power Dissipation………………………………457mWATT

Recommended Operating Conditions

Supply Voltage Operating (VCC) . . . . . . . ..1.65V to 5.5V

Control Input Voltage (VIN) . . . . . . . . . . . . . . .0V to VCC

Switch Input Voltage (VIN) . . . . . . . . . . . . . . . .0V to VCC

Output Voltage (VOUT) . . . . . . . . . . . . . . . . . . 0V to VCC

Operating Temperature (TA) . . . . . . . . . . .–40°C to +85°C

Input Rise and Fall Time (tr,tf)

Control Input VCC = 2.3V - 3.6V. . . . . . 0ns/V to 10ns/V

Control Input VCC = 4.5V - 5.5V. . . . . . . 0ns/V to 5ns/V

Thermal Resistance (ΘJA) . . . . . . . . . . . . . . 350°C/W

NOTES

a. Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings.

b. All leads soldered to PC Board.

c. Derate 5.7 mW/ °C above 70 °C

Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.