R5F10RB8AFP datasheet(33/76 Pages) RENESAS

33 / 76 page

RL78/L12

2. ELECTRICAL SPECIFICATIONS (TARGET)

Page 33 of 73

R01DS0157EJ0001 Rev.0.01

2012.02.20

Under development

Preliminary document

Specifications in this document are tentative and subject to change.

Caution

The pins mounted depend on the product.

Refer to 1.3.1

32-pin products to 1.3.5

64-pin

products.

(TA =

−40 to +85°C, 1.6 V ≤ EVDD = VDD ≤ 5.5 V, VSS = EVSS = 0 V)

Parameter

Symbol

Conditions

MIN.

TYP.

MAX.

Unit

Real-time clock operation

0.02

RTC operating

current

IRTC

Notes 1, 2

fSUB = 32.768 kHz

Interval timer operation

0.02

μA

Watchdog timer

operating

current

IWDT

Notes 2, 3

fIL = 15 kHz

0.22

μA

Normal mode, AVREFP = VDD = 5.0 V

1.3

1.7

A/D converter

operating

current

IADC

Note 4

Low voltage mode, AVREFP = VDD = 3.0 V

0.5

0.7

Temperature

sensor

operating

current

ITMPS

μA

LVD operating

current

ILVI

Note 5

0.08

μA

BGO operating

current

IBGO

Note 6

2.50

12.20

ILCD1

Notes 7, 8

External resistance

division method

LCD clock = 128 Hz

VDD = 5.0 V

T.B.D.

μA

ILCD2

Note7

Internal voltage

boosting method

LCD clock = 128 Hz

VDD = 3.0 V

1.0

T.B.D.

μA

LCD operating

current

ILCD3

Note7

Capacitor split

method

LCD clock = 128 Hz

VDD = 3.0 V

0.12

T.B.D.

μA

Notes 1.

Current flowing only to the real-time clock (excluding the operating current of the XT1 oscillator).

The

TYP. value of the current value of the RL78/L12 is the sum of the TYP. values of either IDD1 or IDD2, and

IRTC, when the real-time clock operates in operation mode or HALT mode.

The IDD1 and IDD2 MAX.

values also include the real-time clock operating current.

However, IDD2 subsystem clock operation

includes the operational current of the real-time clock.

When high-speed on-chip oscillator and high-speed system clock are stopped.

Current flowing only to the watchdog timer (including the operating current of the low-speed on-chip

oscillator).

The current value of the RL78/L12 is the sum of IDD1, IDD2 or IDD3 and IWDT when fCLK = fSUB

when the watchdog timer operates in STOP mode.

Current flowing only to the A/D converter.

The current value of the RL78/L12 is the sum of IDD1 or IDD2

and IADC when the A/D converter operates in an operation mode or the HALT mode.

Current flowing only to the LVD circuit.

The current value of the RL78/L12 is the sum of IDD1, IDD2 or

IDD3 and ILVI when the LVD circuit operates in the Operating, HALT or STOP mode.

Current flowing only when the BGO operates.

The current value of the RL78/L12 is the sum of IDD1 or

IDD2 and IBGO when the BGO operates in an operation mode.

Current flowing only to the LCD controller/driver (VDD pin).

The current value of the RL78/L12

microcontrollers is the sum of the LCD operating current (ILCD1

, ILCD2 or ILCD3) to the supply current (IDD1,

or IDD2) when the LCD controller/driver operates in an operation mode or HALT mode. Not including the

current that flows through the LCD panel.

Not including the current that flows through the LCD divider resistor.

Remarks 1. fIL:

Low-speed on-chip oscillator clock frequency

2. fSUB: Subsystem clock frequency (XT1 clock oscillation frequency)

3. fCLK: CPU/peripheral hardware clock frequency

4. Temperature condition of the TYP. value is TA = 25

°C

R5F10RB8AFP 데이터시트(PDF) 33 Page - Renesas Technology Corp

R5F10RB8AFP 데이터시트(HTML) 33 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76

데이터시트 다운로드

링크 URL