ME7660

CMOS IC

UNISONICTECHNOLOGIESCO.,LTD

5 of 5

www.unisonic.com.tw

QW-R502-730.a

TESTING CIRCUIT

TYPICAL APPLICATION CIRCUIT

Above figure is the basic application circuit to provide a negative supply from -1.5V ~ -10V while a positive

supply from +1.5V ~ +10V is available. When V

-4V while the load current is 10mA.

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or

other parameters) listed in products specifications of any and all UTC products described or contained

herein. UTC products are not designed for use in life support appliances, devices or systems where

malfunction of these products can be reasonably expected to result in personal injury. Reproduction in

whole or in part is prohibited without the prior written consent of the copyright owner. The information

presented in this document does not form part of any quotation or contract, is believed to be accurate

and reliable and may be changed without notice.