SMD Power Resistors

Type 3520 Series

TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.

Other logos, product and Company names mentioned herein may be trademarks of their respective owners.

While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other

representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein

at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili-

ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change

without notice. Consult TE for the latest dimensions and design specifications.

How to Order

3520

1K0

J

T

Common Part

1 ohm

1000 milli ohms

1R0

1K ohm

1000 ohms

1K0

1 Meg ohm

1000000 ohms

1M0

Resistance Value

J - 5%

Tolerance

Pack Style

3520

T - 4000 / reel

Handling Recommendations

When flow soldering - the land width must be smaller than the Chip Resistor width to properly control the solder

application. Generally, the land width can be Chip Resistor width (W) x 0.7 to 0.8. When reflow soldering - solder

application amount can be adjusted. Thus the land width can be set to W x 1.0 to 1.3.

Dimensions

LW

a

b

t

6.40

3.20

0.70

0.70

0.60

±0.20

±0.20

±0.10

±0.20

±0.10

L

a

W

t

b