| 전자부품 데이터시트 검색엔진 |
|
PTH08T255WAD 데이터시트(PDF) 8 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
PTH08T255WAD 데이터시트(HTML) 8 Page - Texas Instruments |
|
8 / 35 page ![]() APPLICATION INFORMATION ADJUSTING THE OUTPUT VOLTAGE SET O 0.7 R 8.25 (k ) V 0.7 0.7 30.1 10 æ ö ç ÷ ç ÷ = - W ç ÷ - æ ö - ç ÷ ç ÷ è ø è ø (1) +Sense V O -Sense GND V O Adj PTH08T255W 10 17 11 16 13 4 18 12 9 8 V O GND GND GND AGND R SET 1% 0.05 W C O + +Sense V O -Sense GND UDG-08145 PTH08T255W SLTS290 – NOVEMBER 2008 ........................................................................................................................................................................................... www.ti.com The Vo Adjust control sets the output voltage of the PTH08T255W. The adjustment range of the PTH08T255W is 3.0 V to 5.25 V. The adjustment method requires the addition of a single external resistor, RSET, that must be connected directly between pins Vo Adjust (pin 18) and AGND (pin 4). Figure 6 shows the placement of the required resistor. To set the output voltage, the value of the required resistor can either be calculated using the following formula, or simply selected from the range of standard resistor values given in Table 2. Table 2. Output Voltage Set-Point Resistor Values VO Required (V) RSET (kΩ) VO Required (V) RSET (kΩ) 3.0 100 4.2 6.81 3.1 63.4 4.3 5.90 3.2 45.3 4.4 4.99 3.3 34.0 4.5 4.22 3.4 27.4 4.6 3.48 3.5 22.1 4.7 2.87 3.6 18.2 4.8(3) 2.32 3.7 15.4 4.9(3) 1.82 3.8 13.0 5.0(3) 1.37 3.9 11.0 5.1(3) 0.931 4.0 9.31 5.2(3) 0.549 4.1 8.06 5.25(3) 0.374 (1) RSET: Use a 0.05-W resistor with a tolerance of 1% and temperature stability of 100 ppm/°C (or better). Connect the resistor directly between pins 18 and 4, as close to the regulator as possible, using dedicated PCB traces. (2) Any capacitance added to the VO Adjust pin affects the stability of the regulator. (3) When setting the output voltage to 4.8V or greater, the Auto-Track pin must be directly connected to VI if the feature is not used. If the Auto-Track feature is utilized, a 100k Ω resistor must connect the Auto-Track pin to VI. Figure 6. VO Adjust Resistor Placement 8 Copyright © 2008, Texas Instruments Incorporated Product Folder Link(s): PTH08T255W |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |