EM357-MOD-RF-T datasheet(13/43 Pages) SILABS

13 / 43 page

3-3

EM35x Development Kit User Guide

120-4030-000E

•

A buzzer, two buttons, two LEDs, and a temperature sensor for application development purposes

•

Hardware reset buttons for the EM35x module

•

Prototype or breadboarding area (28 x 20, 0.1” pitch array) for application-specific hardware

development

•

One InSight data emulation interface connector

For detailed information about the Breakout Board, see document 120-2009-000, the EM35x Breakout Board

Technical Specification.

3.2.2

EM35x Module

The EM35x Series Development Kit Module pictured in Figure 3-3 is used together with the Development Kit

Breakout Board to prototype customer hardware, and to develop and debug application software. Its low-power

design represents a good starting point for your own product design.

Figure 3-3. EM35x Breakout Board with EM35x Module installed

The EM35x Module includes these components:

•

The Ember EM35x SoC (IEEE 802.15.4-compliant, 2.4 GHz radio transceiver with ARM

® Cortex-M3

microcontroller).

•

All off-chip components required for optimum SoC performance

•

Two LEDs

•

InSight Port connector

EM357-MOD-RF-T 데이터시트(PDF) 13 Page - Silicon Laboratories