| 전자부품 데이터시트 검색엔진 |
|
TS881 데이터시트(PDF) 6 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
TS881 데이터시트(HTML) 6 Page - STMicroelectronics |
|
6 / 17 page ![]() Electrical characteristics TS881 6/17 Doc ID 023340 Rev 1 TPHL Propagation delay (high to low) f= 1 kHz,CL =30 pF, RL =1MΩ Overdrive = 10 mV -40 °C < Tamb < +125 °C Overdrive = 100 mV -40 °C < Tamb < +125 °C 6.4 2.3 12 14 3.0 3.7 µs TR Rise time (10% to 90%) CL =30pF, RL =1 MΩ 120 ns TF Fall time (90% to 10%) CL =30pF, RL =1 MΩ 130 ns TON Power-up time 0.9 1.5 ms 1. All values over the temperature range are guaranteed through correlation and simulation. No production test is performed at the temperature range limits. 2. The offset is defined as the average value of positive and negative trip points (input voltage differences requested to change the output state in each direction). 3. The hysteresis is a built-in feature of the TS881. It is defined as the voltage difference between the trip points. 4. Maximum values include unavoidable inaccuracies of the industrial tests. Table 5. VCC =+5V, Tamb = +25 °C, VICM =VCC/2 (unless otherwise specified) (1) Symbol Parameter Test conditions Min. Typ. Max. Unit VIO Input offset voltage(2) -40 °C < Tamb < +125 °C -6 1 6 mV ΔVIO Input offset voltage drift -40 °C < Tamb < +125 °C 3 µV/°C VHYST Input hysteresis voltage (3) -40 °C < Tamb < +125 °C 1.6 3.1 4.2 mV IIO Input offset current(4) -40 °C < Tamb < +125 °C 10 100 pA IIB Input bias current(4) -40 °C < Tamb < +125 °C 110 100 pA ICC Supply current per operator No load, output low, VID = -0.1 V -40 °C < Tamb < +85 °C -40 °C < Tamb < +125 °C No load, output high, VID = +0.1 V -40 °C < Tamb < +85 °C -40 °C < Tamb < +125 °C 350 250 500 750 1350 400 650 1250 nA ISC Short-circuit current Source Sink 32 36 mA VOH Output voltage high Isource =2 mA -40 °C < Tamb < +85 °C -40 °C < Tamb < +125 °C 4.86 4.75 4.60 4.90 V VOL Output voltage low Isink =2mA -40 °C < Tamb < +85 °C -40 °C < Tamb < +125 °C 95 130 170 280 mV Table 4. VCC =+2.7V, Tamb =+25 °C, VICM =VCC/2 (unless otherwise specified) (1) (continued) Symbol Parameter Test conditions Min. Typ. Max. Unit |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |