AM29F800B_09 datasheet(25/45 Pages) SPANSION

25 / 45 page

November 17, 2009 21504E8

Am29F800B

D A TA SH EE T

ABSOLUTE MAXIMUM RATINGS

Storage Temperature

Plastic Packages . . . . . . . . . . . . . . .–65

° C to +150° C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . .–55

° C to +125° C

Voltage with Respect to Ground

VCC (Note 1) . . . . . . . . . . . . . . . .–2.0 V to +7.0 V

A9, OE#, and

RESET# (Note 2). . . . . . . . . . . . –2.0 V to +12.5 V

All other pins (Note 1) . . . . . . . . . –0.5 V to +7.0 V

Output Short Circuit Current (Note 3) . . . . . . 200 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During

voltage transitions, input or I/O pins may undershoot VSS

to –2.0 V for periods of up to 20 ns. See Figure 6.

Maximum DC voltage on input or I/O pins is VCC +0.5 V.

During voltage transitions, input or I/O pins may overshoot

to VCC +2.0 V for periods up to 20 ns. See Figure 7.

2. Minimum DC input voltage on pins A9, OE#, and RESET#

is –0.5 V. During voltage transitions, A9, OE#, and

RESET# may undershoot VSS to –2.0 V for periods of up

to 20 ns. See Figure 6. Maximum DC input voltage on pin

A9 is +12.5 V which may overshoot to +13.5 V for periods

up to 20 ns.

3. No more than one output may be shorted to ground at a

time. Duration of the short circuit should not be greater

than one second.

Note: Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This is

a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the

operational sections of this data sheet is not implied.

Exposure of the device to absolute maximum rating

conditions for extended periods may affect device reliability.

OPERATING RANGES

Industrial (I) Devices

Ambient Temperature (TA) . . . . . . . . . –40°C to +85°C

Extended (E) Devices

Ambient Temperature (TA) . . . . . . . . –55°C to +125°C

VCC Supply Voltages

VCC for all devices . . . . . . . . . . . . . . .+4.5 V to +5.5 V

Note: Operating ranges define those limits between which

the functionality of the device is guaranteed.

20 ns

+0.8 V

–0.5 V

20 ns

–2.0 V

Figure 6.

Maximum Negative

Overshoot Waveform

20 ns

VCC

+2.0 V

VCC

+0.5 V

20 ns

2.0 V

Figure 7.

Maximum Positive

Overshoot Waveform

AM29F800B 데이터시트(PDF) 25 Page - SPANSION

AM29F800B 데이터시트(HTML) 25 Page - SPANSION

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

데이터시트 다운로드

링크 URL