AD9501 datasheet(4/12 Pages) AD

4 / 12 page

AD9501

REV. A

–4–

AD9501 PIN DESCRIPTIONS

Pin No.

Name

Function

1+VS

Positive voltage supply; nominally +5 V.

LATCH

TTL/CMOS register control line. Logic HIGH latches input data D0–D7. Register is

transparent for logic LOW.

TRIGGER

TTL/CMOS-compatible input. Rising edge triggers the internal ramp generator, and begins

the delay cycle.

RESET

TTL/CMOS-compatible input. Logic HIGH resets the ramp voltage and OUTPUT.

DAC OUTPUT

Output voltage of the internal digital-to-analog converter.

6CEXT

Optional external capacitor connected to +VS; used with RSET and 8.5 pF internal capacitor

to determine full-scale delay range (tDFS).

7RSET

External resistor to ground, used to determine full-scale delay range (tDFS).

OFFSET ADJUST Normally connected to GROUND. Can be used to adjust minimum propagation delay (tPD);

see Theory of Operation text.

GROUND

Circuit ground return.

OUTPUT

TTL-compatible delayed output pulse.

+VS

Positive voltage supply; nominally +5 V.

12-19

D0–D7

TTL/CMOS-compatible inputs, used to set the programmed delay of the AD9501 delayed

output. D0 is LSB and D7 is MSB.

GROUND

Circuit ground return.

AD9501 Equivalent Circuits

WARNING!

ESD SENSITIVE DEVICE

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the AD9501 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

AD9501 데이터시트(PDF) 4 Page - Analog Devices

AD9501 데이터시트(HTML) 4 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

데이터시트 다운로드

링크 URL