REF01HP datasheet(5/12 Pages) AD

5 / 12 page

REV. C

–5–

REF01

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection. Although

the REF01 features proprietary ESD protection circuitry, permanent damage may occur on devices

subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are

recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

ABSOLUTE MAXIMUM RATINGS

Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V

Output Short Circuit Duration

(to Ground or VIN) . . . . . . . . . . . . . . . . . . . . . . . . Indefinite

Storage Temperature Range

J, RC, and Z Packages . . . . . . . . . . . . . . . –65

°C to +150°C

P Package . . . . . . . . . . . . . . . . . . . . . . . . . –65

°C to +125°C

Operating Temperature Range

REF01A . . . . . . . . . . . . . . . . . . . . . . . . . . –55

°C to +125°C

REF01CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0

°C to 70°C

REF01CP, REF01CS, REF01E,

REF01H . . . . . . . . . . . . . . . . . . . . . . . . . –40

°C to +85°C

Junction Temperature (TJ) . . . . . . . . . . . . . –65°C to +150°C

Lead Temperature (Soldering @ 60 sec) . . . . . . . . . . . . 300

°C

*Absolute maximum ratings apply to both DICE and packaged parts, unless other-

wise noted.

Package Type

JA*

Unit

TO-99 (J)

170

°C/W

8-Pin Hermetic DIP (Z)

162

°C/W

8-Pin Plastic DIP (P)

110

°C/W

8-Pin SO (S)

160

°C/W

* JA is specified for worst-case mounting conditions, i.e.,

JA is

specified for device in socket for TO, CERDIP, and P-DIP pack-

ages; JA is specified for device soldered to printed circuit board for

SO package.

ORDERING GUIDE

TA = 25 C

Package Description

Operating

VOS Max

CERDIPS

PDIP

SOIC

Temperature

(mV)

TO-99

8-Lead

Range

±30

REF01AZ

MIL

±30

REF01EJ

REF01EZ

XIND

±50

REF01HZ

REF01HP

REF01HS3

XIND

±100

REF01CJ

COM

±100

REF01CP

REF01CS

XIND

±100

XIND

NOTES

1Burn-in is available on commercial and industrial temperature range parts in Cerdip, plastic DIP, and TO-can packages.

2For devices processed in total compliance to MIL-STD-883, add 883 after part number. Consult factory for 883 data sheet.

3For availability and burn-in information on SO package, contact your local sales office.

REF01HP 데이터시트(PDF) 5 Page - Analog Devices

REF01HP 데이터시트(HTML) 5 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12

데이터시트 다운로드

링크 URL