SL Power Electronics Corp

AC Input

100-240VAC +/- 10%, 47-63 Hz single phase.

Turn On Time

Less than 1 second under all rated load conditions.

Input Current

115VAC: 0.7A, 230VAC: 1.5A.

Hold-up Time

<17 ms at 65W, nominal input (120VAC).

Inrush Current

The inrush at 264VAC, at a cold start, will not exceed 40A.

Overvoltage Protection

Built-in

Input Fuses

F1, F2: 2.5A, 250VAC fuses provided on all models.

Overload Protection

Hiccup Mode

Earth Leakage Current

<300μA @ 264Vac, 60Hz, normal; <500μA SFC.

Short Circuit Protection

Hiccup Mode

Efficiency

Up to 90% typical.

Switching Frequency

Variable 50-75kHz typical.

Output Power

65W continuous.

Medical Safety Standards

EN/IEC/UL 60601-1, 2

Ripple and Noise

1% pk-pk max., 20MHz BW, differential mode. Measured with noise

probe directly across output terminals.

Isolation

Input-Output: 4000VAC, Input-Ground: 1800VAC, Output-Ground:

500VAC

Output Voltage

See chart.

Operating Temperature

0

 to 70C (derate from full rated power above 40C).

Voltage Adjustability

Voltage pre-set by fixed resistance.

Cooling

Convection

Minimum Load

Not required.

Output Power Derating

See derating chart

Total Regulation

+/- 2%. See chart.

Storage Temperature

-40 to +85

C.

Transient Response

500μs max., 50% load step, typical.

Relative Humidity

5% to 95%, non-condensing

MINT1065

65W Single Output Series

Medical & ITE – Universal Input Power Supply

3 Year Warranty

•

65W Convection Cooled AC-DC Power Supply

•

Universal Input 90-264 VAC

•

Less than 0.5W No Load Power Dissipation

•

Rugged EMC Compliant Design

•

2” x 4” x 1.2” Package

•

Approved to EN/IEC/UL60601-1, 2

•

Approved to EN/IEC/UL60950-1, 2

•

Meets Efficiency Level IV Efficiency

•

Compliant (LVD, RoHS)

•

Optional Chassis/Cover

Specifications

All Specifications are typical at nominal input, full load at 25

C unless otherwise stated.