SSC

SZ5P

August 2011

August 2011

www.seoulsemicon.com

www.seoulsemicon.com

서식번호 : SSC- QP- 7- 07- 12 (Rev.00)

21

The Z-Power LED is encapsulated with a silicone resin for the highest flux efficiency.

Notes for handling:

• Avoid touching silicone resin parts especially with sharp tools such as Pincetter

(Tweezers)

• Avoid leaving fingerprints on silicone resin parts.

• Silicone resin will attract dust so use covered containers for storage.

• When populating boards in SMT production, there are basically no restrictions

regarding the form of the pick and place nozzle, except that excessive mechanical

pressure on the surface of the resin must be prevented.

• It is not recommend to cover the silicone resin of the LEDs with other resin

(epoxy, urethane, etc)

Handling of Silicone resin LEDs