 2012 Microchip Technology Inc.

DS22306A-page 13

MCP2025

2.0

ELECTRICAL

CHARACTERISTICS

2.1

Absolute Maximum Ratings†

ESD protection on all other pins (Human Body Model) (Note 5) ............................................................................. ±4 kV

ESD protection on all pins (Charge Device Model) (Note 6) ................................................................................±1500V

ESD protection on all pins (Machine Model) (Note 7).............................................................................................±200V

Maximum Junction Temperature............................................................................................................................. 150

C

Storage Temperature ..................................................................................................................................-65 to +150

C

Note 1:

LIN 2.x compliant specification.

2:

SAE J2602 compliant specification.

3:

ISO 7637 immunity against transients (t < 500 ms).

4:

According to IEC 61000-4-2, 330Ω, 150 pF and Transceiver EMC Test Specifications [2] to [4].

5:

According to AEC-Q100-002 / JESD22-A114.

6:

According to AEC-Q100-011B.

7:

According to AEC-Q100-003 / JESD22-A115.

2.2

Nomenclature Used in this Document

Some terms and names used in this data sheet deviate from those referred to in the LIN specifications. Equivalent

values are shown below.

† NOTICE

: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This

is a stress rating only and functional operation of the device at those or any other conditions above those indicated in

the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods

may affect device reliability.

LIN 2.1 Name

Term used in the following tables

not used

ECU operating voltage

Supply voltage at device pin

Current limit of driver

Recessive state

Dominant state