2

FTP-639USL100-R Series

PRELIMINAR

Y

Interface

Serial (RS232C), USB

24VDC ± 5%, Voltage

For head

1.0 (2.0) A (at 200 mm/s printing speed, 1 division)

0.7 (1.0) A (at 125 mm/s printing speed, 2 divisions)

0.6 (1.0) A (at 80 mm/s printing speed, 2 divisions)

0.6 (2.0) A (at 80mm/s printing speed, automatic division)

For print motor

24VDC ± 5%, 1.1 A maximum, 0.9A average

For cutter

24VDC ± 5%, 1.3 A maximum

For logic

5VDC ± 5%, 0.2 A maximum (converted from 24V)

Part number

FTP-639USL101/102/201/202

Printing method

Thermal-sensitive line dot method

Dot structure

576 dots/line

Dot pitch (Horizontal)

0.125 mm (8 dots/mm)—Dot density

Dot pitch (Vertical)

0.125 mm (8 dots/mm)—Line feed pitch

Effective printing area

72 mm

Paper width

80 mm

Paper thickness

60 to 100 µm

Paper print length

50 to 250mm

Cutting type

Full or partial

Number of columns

48 columns/line (12×24 dot font)

Maximum printing speed

1600 dotlines/s (200 mm/s)

Page mode

Middle speed mode

80mm/sec. without automatic division

High speed mode

125 mm/sec.without automatic division

Ultra high speed mode

200 mm/sec.without automatic division

Alphanumeric KANA: 159, Registered: 94, International: 195, OCR: 103

Character types

JIS KANJI (FTP-629DSL400): approximately 6800

24 × 12 dots, (3.0 × 1.5 mm), 48 columns

24 × 24 dots, (3.0 × 3.0 mm), 24 columns

16 × 8 dots, (2.0 × 1.0 mm), 72 columns

16 × 16 dots, (2.0 × 2.0 mm), 36 columns

OCR I: 24 × 40, 24 columns

OCR III: 24 × 48, 24 columns

OCR IV: 36×60, 16 columns

Expanded: 24×48, 24 columns

n

SPEcIFIcATIONS

Specifications

Item

+0

-1

Character composition, dimensions (H×W),

Number of characters

Power supply

(Continued)